|
CamSoft Offers various digital IO boards
in various configurations to meet any Machine Tool Application Requirements.
This is the most popular selection and is just one of the many possible
solutions. Use our Product Advisor or call our applications
engineers to assist you in selecting the best hardware for your
application. |
Digital IO
32 IO PCI Card |
 |
 |
|
FEATURES
- 32 TTL compatible digital I/Os
- High sink current digital output
- 4 interrupt signals, 1 interrupt request
- Low power consumption
- Bit input/output
- Group input/output
- Digital filter
- Output data monitor
SPECIFICATIONS
Digital Input
- No. of channels: 16
- Type: TTL compatible inputs (negative logic)
- Input resistance: 10K Ohms
- Interrupt: Combine 4 interrupt signal lines to one interrupt request signal as INTA
- Rising edge or falling edge input signal can be generate an interrupt
Digital Output
- No. of channels: 16
- Type: Open collector outputs (negative logic)
General
- Board no. switch: 00h to 0Fh
- Throughput rate: 200ns max.
- Power consumption: +5VDC 400mA max.
- Connector: 37-pin female D-type
- Dimensions: 4.75" x 4.25"
|
Digital IO
PCI or PCI-e Cards |
|
 |
|
FEATURES
- I/O quantity choices: 24/48/96
- includes: either TTL terminal strips or relay racks plus cables
- Emulates industry standard 8255 chip
- Compatable with Opto-22 G4 I/O relays as well as other brands
- Onboard resettable fuses for power output protection
SPECIFICATIONS
Digital Input
- No. of I/Ochannels: 24/48/96
- high speed assembler code driver. Detects input at 1/10,000 th of a second
- Relay voltages between 5V to 440V AC or DC
Digital Output
- No. of channels: 24/48/96
- Relay voltages between 5V to 440V AC or DC
General
- Power consumption: +5VDC 860mA Typical
- Connector: 50-pin cable connections provided
|
PCI to PCI-e Adapter
|
|
|
|
Allows regular PCI cards to plug into PCI-e slots.
|
Relay Rack
32-channel I/O Module Rack
Dimension:
10" x 6.5" x 2.5"
Connector:
37-pin female D-type
Control Power:
5VDC
24-channel I/O Module Rack
Dimension:
7" x 6.25" x 2.5"
Connector:
50-pin female
Ribbon Cable Dimension:
50-pin - 1.5 Meters
Control Power:
5VDC
|
|
 |
Input & Ouptut Relay Modules
Optically isolated voltages
Field side:
AC or DC 5V to 440V
Control Side:
5 Volt Logic @ 12mA nom.
|
|
  |
|
Some additional available configurations:
- 24 point digital I/O ISA board with TTL terminal strip
or Relay Rack and Cable
- 48 point digital I/O PCI board with TTL terminal strip or Relay Rack and Cable
- 96 point digital I/O PCI board with TTL terminal strip
or relay racks and cables
- 120 point digital I/O ISA board with TTL terminal strip
or relay racks and cables
- 144 point digital I/O ISA board with TTL terminal strip
or relay racks and cables
|
Stand Alone Relay Racks |
|
|
|
|
|
|
Stand Alone relay racks provide opto isolation using OPTO 22 G4 digital relay modules. These spare relay racks and digital IO modules can help guard against electrical noise and provide signal isolation.
Relay rack configurations:
- 16 point I/O G4 module rack
- 4 point I/O G4 module rack
|
24 IO Relay Board |
|
|
|
FEATURES
- 24 IO Terminals
- Built On Optical Isolated Inputs
- Eliminates The Need For Relay Rack With Relays
- 12, 14, or 32 Volts
- 50 Pin Header Cable
- Interchangeable With Our Relay Racks For The 24, 48, & 96 IO Cards
|
Black IO Box |
|
|
|
Low cost I/O boxes for slow (under 200ms) I/O requirements such as a hand held pendants , light bulbs, push buttons, doors open or any on/off, open/close verification needs.
Each box has 14 non-optical isolated points to be used as either inputs or outputs that act on TTL 5V logic at 24mA. Can be used with our Stand Alone Relay Racks if optical isolation or high voltage relays are required.
2 cables are provided.
One cable provided to connect to PC power supply and another RS232 cable to connect to 9 pin serial port on PC. USB cable $35 extra.
Box dimension is 5"x5"x1.5"
|
| |
|
|
| |
|
|
| |
|
|
